× Kiểm tra đơn hàng

ADD 536 - Aerosol Distribution and Dilution System

  • Thương hiệu:
  • Sản xuất tại:
    Đức
  • Mã HH:
  • Đơn vị tính:
    Cái
Tổng quan về sản phẩm

The Aerosol Distribution and Dilution System ADD 536 was developed by Topas for protection grade measurement in operating rooms according to SWKI 99-3 and DIN 1946-4. It provides test aerosol generated by an aerosol generator (e.g. Topas ATM 226) at six different outlet ports with a defined source flow, especially for verification of hospital operating rooms.

Hospital operating rooms are specially designed to avoid contaminations and therefore additional infections of patients during operations. To assure a low level of particle contaminations a laminar air flow is applied to the operating table. To verify the retention efficiency of this flow regime a verification with a defined test aerosol is required according to the standards DIN 1946-4 and SWKI 99-3.  For that reason a total particle rate of 6.3·109 P/min has to be distributed to six different positions and emitted with a reliable long term stability. From the standards it is also required that this total particle rate is continuously monitored and controlled by a particle counter.

The Aerosol Ditribution and Dilution System meets all these required demands for providing a defined test aerosol with the following features:

  • Internal generation of a total nominal flow (free of particles) for supplying the six outlet ports
  • Homogeneous mixing of the test aerosol coming from an external aerosol generator with this total transportation flow
  • Internal adjustable aerosol dilution ratio for direct connection of a particle counter (e.g. Topas LAP 340) used for controlling a stable particle rate
  • Uniform aerosol distribution to six outlet ports

Advantages

  • Designed to comply with the requirements of the German standard DIN 1946-4 and the Swiss guideline SWKI 99-3
  • Reliable particle generation rate with an excellent long term stability (particles/time)
  • Status information on dilution ratio and total flow rate integrated at the front

Applications

  • Protection grade measurement of operating rooms/theatres according to German DIN 1946-4 and Swiss SWKI 99-3 and VDI 2167 Part 1
  • Generation of test aerosols by providing a reliable, reproducible, long term constant, but concentration variable particle stream in connection with a high-concentration particle source e.g. for verification or calibration of particle counters (dilution series with PSL aerosols)

Accessories

  • Necessary Accessories

    • Optical particle counter (flow rate: 0.1…1 cfm, lower detection limit >0.3 µm, e.g. Topas Cleanroom Particle Counter LAP 340, Lighthouse Solair)
    • Aerosol generator (flow rate <300 l/h, particle rate >6.3×109p/min, particle output adjustable, e.g. Topas Atomizer Aerosol Generator ATM 226)
  • Complementary Accessories

    • Software package OPQWin for automated data acquisition and printout protocoll as result according to current standards or guidelines of protection grade measurements
    • Software package PASWin for automated data acquisition and device control of optical particle counters

Principle

  • By an external particle counter continuously controlled particle production rate
  • Compact portable design, easy to setup
  • Internal generation of particle free transportation flow without requesting a compressed air source
  • Integrated, highly efficient aerosol dilution, with a wide range of adjustable dilution ratios with excellent reproducibility to be directly connected to particle counter
  • Electronically controlled and adjusted dilution ratio adapted to particle counter in use

Specifications

  • Dilution Ratio: Adjustable to the used particle counter,  > 1:10000
  • Flow Rate of the Particle Counter: 28.3 l/min (1 cfm)
  • Flow Rate of the Aerosol Generator: max. 5 l/min
  • Internal Transportation Flow Rate: 100 l/min
  • Outlet Ports: 6 ports, diameter 65 mm
  • Power Supply: 230 V AC
  • Dimensions: 250 mm x 340 mm x 330 mm
  • Hose Connector: 10 mm
  • Weight: 8.5 kg
Chọn sản phẩm
Chọn Giá Tên HH Mã HH
Tài liệu tham khảo
Tiêu đề Link download
ADD 536 - Aerosol Distribution and Dilution System ADD 536 - Aerosol Distribution and Dilution System
Yêu cầu báo giá
1 điểm 2 điểm 3 điểm 4 điểm 5 điểm
0
Hiện chưa có đánh giá nào
5 sao 0%
4 sao 0%
3 sao 0%
2 sao 0%
1 sao 0%
Câu hỏi về sản phẩm
Hãy đặt câu hỏi để chúng tôi có thể hỗ trợ bạn tốt hơn, xin chân thành cảm ơn.
Lượt đánh giá
Câu hỏi
THÔNG TIN HỖ TRỢ
Nhân viên tư vấn:
- Miền Bắc: Lê Tố hơn
  + Điện thoại: 0916 557 639
  + Email: hon@vietphat.com
 
- Miền Nam: Dương Thế Tri
  + Điện thoại: 0964 722 319
  + Email: tri@vietphat.com
 
Tổng đài hỗ trợ chung:
   + Điện thoại: 02871 077 078
   + Email: sales@vietphat.com
TIN TỨC LIÊN QUAN
Sản phẩm liên quan
Đăng ký nhận email khuyến mãi Vui lòng nhập email của bạn để nhận được thông tin khuyến mãi
Hotline:
0829.077.078
Ngoài giờ:
0827.077.078
Yêu cầu báo giá